Mounding Day(s) at Cockatoo Creek

Just over twelve kilometres of mounds have been created along the western side of Cockatoo Creek. We had some challenges as the mounder needed some repair work. A big thank you to Mark for his excellent machining work – turning rutted parts into smooth operating bliss.

All assembled and ready to go in the SAME  tractor and Jorn swung into action….. after several significant downpours of rain. Steady as we go as Sharon got bogged several times in the Colin’s 4WD ute…. (delivering hot soup for lunch) with her not so well chosen boggy farm track choice not the ute…. Delaying the mounding just a little! It is fascinating to watch the landscape change before your eyes so the dog and I decided to stay a while and check out the progress. oh and take a walk down by the creek – cannot believe how healed and amazing it is today compared to three years when it was s sad and bleak place.

Two long and full days work to work to turn the landscape into the mounds ready for the plants in June. Once planted both sides of Cockatoo will have had a significant amount of regeneration and land given back to nature. The health of the creek has simply skyrocketed since our first regeneration projects three years ago. The beginning of the Tone River has not had it so good in many passing moons. Jezabelle as usual was on the job supervising Jorn to ensure he kept them close and coming!

Advertisements

Broken…… Quick Trip to Perth

Many people use the fabulous mounder that Forestry Products Commission kindly loan us to use. Not everyone treats it well. Once again the mighty mounder needed a little professional tender loving care. Rather than work in until it broke we decided a trip to city to have the rutted parts made smooth again would be in order.

Mark Evans the exceptional machinist did an amazing job at Micron in Malaga. The old mounder is now smooth and sweet and ready to go. Below is Jorn, Mark in the middle and my wonderful Dad who introduced Jorn to Mark!

We Found the Ripper and Mounder – Waiting…… 

Sometimes I feel as if the song “doing it again” should be our mantra. Here we are three years later  heading out of the farm gate on our way to picking up the same Forestry Products Commission mounder from one of their properties in Moodiarup. With the goddess Jezabelle in the back of truck on the sleep bed we headed out from Bellalee hoping to be able to load it onto the truck. The farm it was located in was some distance from Bellalee thus we did not have any friends nearby that we could call on to assist us.

IMG_2597

However the good old fashioned farm network where one person know another who knows another led us to Rob Hewton. Rob generously said he was happy to help us out luckily for us his dad was visiting from town; they actually took the tractor over to the FPC property and left it there for us.

Jorn’s eyes almost popped out of his head when he spotted the near new John Deere tractor just gleaming waiting for him. He had a great time testing it out and changing all the settings – as Jorn does to any machine he jumps into. It made loading the hefty ripper and mounder a breeze. He was expecting something a little older and not as heavy duty.

With the equipment tied down we headed over to Rob’s property just around the corner (about 3kms away) to see if he was home and to say thanks. Rob generously said he and dad would collect the tractor later. Very handy as I do not have a truck licence, not to mention Colin’s old faithful truck has a few nifty tricks to change the gears.

 

We luckily have time on our side with this project as once again the Ripper and Mounder needs a little tender loving care work done on it. You may recall it broke down several times last outing. With the luxury of time Jorn dismantled the “broken bits” and we shall take it to the city to have a gift of new bearings and a smoothing out of the nicks of usage.

Once again a big shout out to the Collie Foresty Products Commission for the loan of the equipment, to Morton Neilson who located it for us and asked FPC on our behalf and to Rob Hewton for the generous use of his John Deere tractor. Not to mention our neighbour Colin Ednie-Brown for the use of “old faithful” the truck.

Ridgey didge we need a light sabre errr life saver

“You do know where it is don’t you”, said Jorn as I happily announced we had been successful in obtaining funding from Southern Dirt for more re-generation work. “Yes, Land for Wildlife site 5”, says I, not really knowing where it was. Okay, over there as I clearly point to the map of the farm. Not really knowing exactly where, you know over there…

Apparently it is rocky ridge country, blink of eye lashes, and this means? River views? Location location in real estate parlance. Good Internet connection potential? Certainly none down at the house.

“How are we going to IMG_2022get the posts in”, clearly I think Jorn is having a lend of me, I am after all country born but lived most of my life as a city girl, I bring a smile and enthusiasm however very little practical knowledge….. I am good at the paper work and writing submissions for grants (apparently). My answer clearly, we do it the way we always do, with the Donnybrook donger Jorn made back in early 1980’s. Here is Jorn out one of the areas to be fenced under the 25th Anniversary Landcare project. Easy, flat, no rocks. We apparently need a little more that old faithful.

As luck and a few telephone calls would have it we have found our saviour in the form of Orchid Valley fencing contractor Kim Sanders. Over we went to visit with some test poles in hand. We use former electricity poles, a bit more work as we have to cut them to size however cheaper than commercially available poles and quicker than finding wood to use from the farm.

IMG_2010 IMG_2007 IMG_2019

Kim has opted in to rescue us! All we need is a little patience (something that I do not possess). Kim is in demand,very, very busy. However he along with his hydraulic post rammer and tractor are spot on for the task to ram the strainer posts into the very rocky ridges that is “Kayla’s Woodland”. (And yes there are views.)

Action plan implemented! The poles aka strainer posts, are all laid out ready to go. We just need to wait for a window of opportunity for the light sabre!

We could never have undertaken any of the work we have done without the unfailing generosity of friends and neighbours. Bellalee has been leased since the year 2000, thus the majority of the equipment used is begged and borrowed. We feel very blessed to have been able undertake this work.

A ripper of a day for boys toys – mound away me hearties.

wow big big day, we have just received word that the ripper/mounder is going to be here around noon. We are very grateful to life long friend Morton Nilsson from Gunns in Bunbury who organised this for us. The machine is courtesy of Greg Hodgson from Forest Products Commission in Collie. A big shout to FPC in Collie and Greg – THANK YOU.

Ripping and mound ploughing for revegetation establishment are techniques used to improve the success (survival and growth rates) of planted seedlings.

Image

Mounding is great for the water logged soils around Cockatoo Creek and the Tone River. It will help to encourage early growth of the seedlngs.

Too much fun? Never.

boys having much fun\